1. The purpose of the project
When 20-30’s have a smart brain and a healthy body, We have actively engaged in economic activity remains surplus funds to efficiently manage and grow old in the future, and do not have the power, or when you are thinking of injustice that the purpose of preparing in advance, the stock has been promoting the project.
The project's progress is a how-to by tourin
3. Agriculture
Finland's climate and soils make growing crops a particular challenge. The country lies between 60° and 70° north latitude - as far north as Alaska - and has severe winters and relatively short growing seasons that are sometimes interrupted by frosts. However, because the Gulf Stream and the North Atlantic Drift Current moderate the climate, Finland contains half of the world's
2. Analysis of project
1) Course of pipeline from knock-out drum on the first floor to storage tank on the third floor.
It is ideal to design pipelines using straight line for economic feasibility and efficiency but that is impossible for the reason of structure of plant. So It is necessary to inspect the structure of plant.
2) What kinds of pipe do we decide?
Considering economi
pipe pile에 의해 지지됨
pipe pile : 직경 914m, 두께 20mm
4m 두께의 8각형 콘크리트 ‘매트’
Super core
RC조, 8각형 모양, 400~600kgf/cm2
벽두께 45~85cm
직경 27m로 내부는 [#]형태의 웨브(web)보강
재료 : 보강 콘크리트
위치 : 타워 주앙에 위치
기능 수평, 수직 하중에 저항
Mega-column
8개소(1.5m * 5m ~ 1
2.4. Bonjean Curve
많은 학생들이 Bonjean Curve 에 대해 답을 하지 못하였다고 하셨다. 우리 조원들도 이 문제에 대해 거의 답을 하지 못하였다고 했다. Bonjean Curve는 부력의 개념이다.
그림 Bonjean Curve
임의의 수선에서 횡단면의 면적은 Simpson's 1st Rule 같은 방법으로 구할 수 있고 이를 수선변화에 따른 곡
FTA on Korea. To this end, we analyze five primary sectors that are deemed to have the greatest impact on both countries: steel, automobiles, chemical products, textiles, and agriculture. We conduct a literature review of these respective sectors (primarily statistics supplied by KIEP and SERI), lay out both the impact of exports and imports, and also point out relevant issues to these sectors.
1 Introduction
When designing an aircraft, it’s all about finding the optimal proportion of the weight of the vehicle and payload. It needs to be strong and stiff enough to withstand the exceptional circumstances in which it has to operate. Durability is an important factor. Also, if a part fails, it doesn’t necessarily result in failure of the whole aircraft.
The main sections of an aircra
Ⅰ. Introduction
1) Location
Russia is located in the north Eurasia continent (Far East Asia ~ Europe). Russia is the largest country in the world which is about 1/8 of the world’s land area. Because of this huge territory, there is an 11-hour time difference between East and West.
2) Climate
The huge territory of Russia also makes a various climate zone. Basically, Russia has continental